Monday, February 20, 2012

France - 1917 Nieuport 24

The First Round Body Nieuport

In 1917 the Nieuport 17 and the improved N.23 were seen as a dead end. Aviation technology development had rendered it less able to perform as a front line fighter. Gustave Delage took what was learned from previous models and created a new design with a new rounded shape and improvements to make Nieuport aircraft viable again. Even though the new design had some problems it served in several nations well after the end of the Great War.


William Wellman was an American flying with the French Black Cat Squadron. The paint scheme is the standard aluminum finish with the squadron insignia on the fuselage. The numbers on the rudder are missing. The wing roundels are the standard 4 point scheme. I am not sure if the number ten was painted on the upper wing or not. I assume it was not, however I may be wrong.


This example has a four color camouflage pattern. I have not seen references for the wing pattern. The insignia is a not a squadron one, but a personal one chosen by the famous French ace Roland Garros. The rudder markings are just the serial number.


The red rear section adds a lot of sizzle to the standard aluminum finish. The insignia is the late version used by the 501st squadron. The rudder markings include the tare and loaded weights.


This example does not carry the squadron insignia (A circle quarter red and dark blue). However the wide tri-color bands add a lot of visual impact. Sané was flying this plane when he was credited with bringing down a Gotha bomber assigned to Kaghol 1 in 1917.


A Short History of the Nieuport 24

The Nieuport 24 introduced a new fuselage with improved aerodynamic characteristics. Other changes included rounded wingtips, and a tail unit incorporating a small fixed fin and a curved rudder. The tail skid was sprung internally and had a neater appearance than that on earlier Nieuports. Power was provided by a 130 hp Le Rhône rotary engine .

In the event, there were problems with the new tail, most production aircraft of the type were of the Nieuport 24bis model, which retained the fuselage and wings of the 24, but reverted to the Nieuport 17 type tailplane, tail skid and rectangular balanced rudder. The new tail design was finally standardized on the Nieuport 27.

A batch of Nieuport 24bis were built at British Nieuport and General Aircraft Co. in England for the Royal Naval Air Service.

The standard armament of the Nieuport 17 (a synchronized 0.303 in (7.7 mm) Vickers in French service - a 0.303 in (7.7 mm) Lewis gun on a Foster mounting on the top wing in British service) was retained to save weight and retain a good performance, although many 24s were used as advanced trainers and normally flown without guns.

In the summer of 1917, when the Nieuport 24 and 24bis. were coming off the production line, most French fighter squadrons were replacing their Nieuport 17s with SPAD S.VIIs - and many of the new fighters went to fighter training schools, and to France’s allies, including the Russians, and the British, who used theirs well into 1918, due to a shortage of S.E.5as. A few French units retained the Nieuport through late 1917 - the type was actually preferred by some pilots, especially the famous Charles Nungesser.

Some of the Nieuport advanced trainers bought by the Americans for their flying schools in France in November 1917 may very well have been 24s or 24bis.

Both Poland and Russia continued to use the Nieuport 24 into the the early 1920's. There are many examples where the same plane fought on both sides of the Polish Russian War of 1919-1921. In some cases it was due to defection of the pilot, or the aircraft was captured by the opposing side.


References

  1. Nieuport 24. (2010, July 13). In Wikipedia, The Free Encyclopedia. Retrieved 10: 18, July 23, 2010, from http: //en.wikipedia.org/w/index.php?title=Nieuport_24&oldid=373176479
  2. Escadrille 501 http://albindenis.free.fr/Site_escadrille/escadrille501.htm
  3. Nieuport Fighters in Action published by Squadron/Signal Publications.
  4. Escadrille 501 http://albindenis.free.fr/Site_escadrille/escadrille502.htm
  5. Nieuport Gallery http://www.cbrnp.com/profiles/quarter1/nieuport-gallery.htm
  6. Bruce, Jack M. More Nieuport Classics. Air Enthusiast, Number Five, November 1977-February 1978. Bromley, Kent, UK: Pilot Press. pp. 14-28.
  7. Cheesman E.F. (ed.) Fighter Aircraft of the 1914-1918 War Letchworth, Harletford Publications, 1960 pp. 96-97

Friday, February 17, 2012

Russia - 1920 Sopwith 7F.1 Snipe

Red Stars and a very Red Nose.

In spite of a nasty cold I have been busy working up illustrations for Project X. I will be posting some details in March. I have been jumping between the Great War and the Inter-war period. My focus has shifted to aircraft flown by the Bolshevik forces. Research on the era is very problematic due to lack of records and the language barrier. With the passing of the last witnesses to events during World War One the task has become even more challenging.


The Mysterious Bolshevik Sopwith Snipes

By the late war The British needed a replacement for the aging Sopwith Camel.The new fighter to take up the fight was the Sopwith 7F.1 Snipe. Delivery of the new aircraft to the RAF began in the early Autumn of 1918. The Snipe was faster, easier to fly and structurally stronger than the Camel. These traits helped the Snipe become the preferred front-line RAF fighter during the early postwar era.

Documents show three Snipes were known to have served with the Soviet Air Service. One of the unsolved mysteries is how these aircraft were acquired. Records show no Royal Air Force units supplied with Snipes operating in Russia. The same can be said for the Polish squadrons opposing the Bolshevik forces. Two of the Snipes are fairly well known, almost nothing is known about the third example.

The Two Faces of Nelly

The most famous of the Soviet Snipes was serial number E6351 which was assigned to the 1st Fighter Detachment. The pilot G. S. Sapozhnikov had the name “Nelly” painted on the starboard side of the fuselage behind the cockpit.


The paint scheme was basically the standard PC-10 finish with light gray panels around the cockpit and a natural metal cowl, under-sufaces are clear doped linen. National markings were red stars painted over the British RAF roundels. The rudder was still painted in the standard British tri-color stripes.


Sapozhnikov's Snipe was repainted. All of the British markings were removed. The new national markings were only applied to the bottom surfaces of the lower wing. Some profiles show the stars as red, however latest research state they are in fact black. A black Ace of Spades cover the fuselage roundels. The rudder is painted blue with a curved black arrow. Sapozhnikoz was killed in this aircraft when his engine failed on takeoff on December 8, 1920.


Sunday, February 12, 2012

Germany - 1916-1918 Assorted Aircraft

Some New German Profiles

I woke this weekend with a cold. Needless to say it has slowed me down a bit. I took a break from working on interwar aircraft to work up a few new German WWI profiles.


The candy cane paint scheme made this Albatros a must do profile.The upper wing surfaces and both sides of the tail plane are painted in white and red stripes running forward to aft. This was one of the German Jastas sent to bolster Austrian operations against Italy. The three Jastas were № 1, № 31, and № 39.


This is another controversial profile. Some sources claim the nose section is bare metal, others claim it was a dark blue. The lozenge colors I used are probably inaccurate. I expect to do a new version once my new master files are completed.


I have seen sources for this Junker CL.I and liked the atypical mustard and green paint scheme. The sources I have found show a different landing gear strut arraignment for this aircraft.


This is a highly conjectural profile based on elements seen in other sources. It depicts one of the approximately finished Zeppelin Lindau Do-I reputed to be hidden by Germany after the Armistice.

Wednesday, February 8, 2012

Germany - 1918 Junkers CL.I

A Life of Controlled Chaos

Things have been hectic in the studio recently. The Polish Project is moving along with new additions to the galleries. New master files are in work and new references have been found. In addition to this I have started a collaboration with a writer like and respect on an upcoming project. I will give more details on the project when I can. All I will say at the moment is it will be a very interesting read.

Long term readers know my opinion on the question of what makes a forward thinking airplane design during the First World War. It is no secret that I think designs with more than a single set of wings was a paradigm which needed to be cast aside. In most cases triplanes were a waste of time and material. Successful triplanes were light weight and small. Ironically this type of airframe was what made the Fokker E.V-D.VIII a great plane.

Junkers's Dream Machine

Hugo Junker was an inspired visionary who did the groundwork for modern aviation. He championed the idea of metal skinned monoplane aircraft in spite of what some saw as common wisdom, but was just another manifestation of lack of vision. Junker went beyond the envelope and saw the shape of things to come. His ideas were picked up by Anthony Fokker, who was always quick to assimilate the work of others, during their joint venture producing the J.10 late in the war.


This is an example of the long body version of the CL.I (J.8 or J.10) painted in a relatively common camouflage scheme.


As with many aircraft a seaplane version was tested for feasibility. This example has an unpainted body and struts with a streaked camouflage on the floats. The rudder on the J.11 was altered as well as the exhaust system.


Overview of the Junkers CL.I

The Junkers CL.I was a ground-attack monoplane aircraft developed in Germany during World War I. Its construction was undertaken by Junkers under the designation J 8. as proof of Hugo Junkers' belief in the monoplane, after his firm had been required by the Idflieg to submit a biplane (the J 4) as its entry in a competition to select a ground-attack aircraft.

The J 8 design took the J 7 fighter as its starting point, but had a longer fuselage to accommodate a tail gunner, and larger wings. The prototype flew in late 1917 and was followed over the next few months by three more development aircraft.

The Idflieg was sufficiently impressed to want to order the type, but had misgivings about Junkers' ability to manufacture the aircraft in quantity and considered asking Linke-Hoffmann to produce the type under license. Finally, however, Junkers was allowed to undertake the manufacture as part of a joint venture with Fokker, producing a slightly modified version of the J 8 design as the J 10. Like the other Junkers designs of the period, the aircraft featured a metal framework that was skinned with corrugated duralumin sheets. 47 examples were delivered before the Armistice, including three built as float planes under the designation CLS.I (factory designation J 11). After the war, one or two CL.Is were converted for commercial service by enclosing the rear cockpit under a canopy.

References

  1. From Wikipedia Junkers CL.I "http://en.wikipedia.org/wiki/Junkers_CL.I"
  2. Green, W; Swanborough, G (1994). "The Complete Book of Fighters. New York: Smithmark. ISBN 0-8317-3939-8.
  3. Gray, Peter; Thetford, Owen (1962). German Aircraft of the First World War". London: Putnam.
  4. Taylor, Michael J. H. (1989). "Jane's Encyclopedia of Aviation". London: Studio Editions. pp. 536.
  5. "World Aircraft Information Files". London: Bright Star Publishing. pp. File 897 Sheet 01.

Friday, February 3, 2012

Poland 1920-1293 Morane-Saulnier A-1 MoS-30

Polish Advanced Trainers

When Poland became an independent nation, one of the important needs was the creation of an effective air force. In the beginning the core was composed of veterans serving with the Germans and Austrians during the First World War. Soon aviators from many nations joined them to create a formidable fighting force. Still more aviators were needed to defend the promise of independence for this fledgling nation. To meet this need flight schools were created to swell the ranks of combat pilots who would defend their country and eventually fight for freedom during the Second World War.

The Morane-Saulnier A-1 had very modern lines and was very streamlined. Even though 1,210 were produced it never made a big impact at the front during the Great War. By mid-May 1918 it was withdrawn to serve as an advanced trainer, designated MoS 30. When France began aiding Poland in their efforts for independence the Morane-Saulnier A-1 was a perfect fit for use in the Polish Advanced Flying Schools.


When the MS A1 was deployed in Poland many of them retained their French markings. I am not sure if they retained the roundels on the wing or if they carried Polish markings.


This is another example of the standard French camouflage pattern. Notable it the lack of wheel covers and color change of the MS logo on the cowling.


In ths profile you see the French camouflage scheme still in use but there is a the shift to use of Polish national insignias.


This example has the dark green color we associate with interwar aircraft. One obvious change is the wide pale blue area on the fuselage. This is fairly atypical. Most late Polish aircraft use gray on the lower surfaces.